Customizing MAC for OCC Modes

This post discusses the topic related to OCC MAC and MPDU.   IEEE 802.15.7m OCC MAC Layer "Use of over-the-air MAC frame configuration is forbidden for PHY types IV, V and VI. It is mandatory MAC frame configuration be done via the MAC PIB. This is due to the fact that unlike traditional wireless LAN/PAN, the data … Continue reading Customizing MAC for OCC Modes

PPDU: PHY frame format for S2-PSK & HS-PSK

This post reviews the design of the Physical-layer Packet Data Unit (PPDU) for S2-PSK and HS-PSK operating modes within PHY IV of IEEE 802.15.7m. The general structure of PPDU for all OCC Operating modes is illustrated in Figure 1. SHR: Synchronization Header PHR: Physical-Layer Header HCS: Header Check Sequence PSDU: PHY service data unit "Use of over-the-air PHY … Continue reading PPDU: PHY frame format for S2-PSK & HS-PSK

PPDU: PHY frame format for CM-FSK & C-OOK

This post reviews the design of the Physical-layer Packet Data Unit (PPDU) for CM-FSK  and C-OOK operating modes within PHY V of IEEE 802.15.7m. For a detailed explanation of how these modes operate, please visit the previous CM-FSM post and the previous C-OOK post. The comparison between these modulation schemes for rolling shutter OCC was discussed … Continue reading PPDU: PHY frame format for CM-FSK & C-OOK

PPDU: PHY frame format for Screen Modulation Systems (A-QL & HA-QL)

This post reviews the design of the Physical-layer Packet Data Unit (PPDU) for A-QL and HA-QL operating modes within PHY IV Screen modulation of IEEE 802.15.7m. For implementation, the Data Frame Format is crucial; each operating mode has its packet format and the format specification has its reason. At least, time is spent on optimizing … Continue reading PPDU: PHY frame format for Screen Modulation Systems (A-QL & HA-QL)